Holt ~ Pewter Industrial Solid Cast Mast Down Light Ship Sconce Sandblasted Bulkhead HandCrafted Wall Nautical Passage Way Philips LED
space-saving illumination while protecting the bulbs they house.
A timeless design from the mid 20th century, originally a mast-mounted fitting for illuminating yacht decks. Its shape ensured rigging lines were not snagged. This clean profile lends itself to being unobtrusive when required or being used as a stylish detail for both interior and exterior accent lighting.
The LED Mast Light is a classic marine design that has been designed for direct connection to a mains voltage circuit without a transformer, incorporating a GU10 base allowing PAR16 lamps to be used. We supply pre-wired with a dimmable Philips GU10 in this fixture.
The installation requires a void or recess behind the fitting to make a connection to the supply.
The supplied Philips LED lamp has a comparable light output to a typical 35W Halogen, but draws considerably less power (4.6W), saving significant amounts of energy.
We also supply at no extra cost with a 240v Philips LED CRI 90 dimmable bulb in this fixture.
Material: Solid Cast Aluminium
Wiring: Hardwired
Dimensions:
Height 13.5cm / 5 Inch
Width 7.5cm / 3 Inch
Depth 9cm / 3.5 Inch
Bulb: Philips 3.8W CRI 90 GU10 Dimmable LED lamp included for United Kingdom & Europe.
Additional Information:
Ingress Protection Rating: 54 (Protected against dust, limited ingress with no harmful deposit. Protected against sprays of water from any direction, limited ingress permitted.)
If ordering from the USA you will need to purchase 110v GU10 bulbs (we supply prewired with 230v GU10 bulbs).
www.vintage-electrical.com
